OPPO has officially launched its new Find X10 series in China, comprising the Find X10, Find X10 E and Find X10 Pro Max. The range continues the company’s focus on smartphone photography, with the Pro Max becoming the first phone to feature three 200MP cameras on its rear.

Interestingly, the company has not announced a Find X10 Ultra alongside the new lineup, at least for now. This follows an earlier report suggesting that the next-generation Ultra model could remain exclusive to China, with OPPO instead focusing its international flagship strategy on the Pro Max.

At the top of the lineup is the Find X10 Pro Max, which features a 6.78-inch 1.5K LTPO display with a 144Hz maximum refresh rate, up to 2,000 nits of peak brightness and a 1.15mm four-sided bezel. It is powered by MediaTek’s Dimensity 9600 Pro chipset, paired with up to 16GB of LPDDR5X RAM and 1TB of UFS 4.1 storage.

The biggest highlight is its rear camera system, which consists of a 200MP main camera with an f/1.5 aperture, a 200MP 124-degree ultrawide camera with an f/2.2 aperture, and a 200MP 3x periscope telephoto camera with an f/2.1 aperture and optical image stabilisation. The setup also includes a 3MP multispectral sensor, while the telephoto camera supports a 10cm close-focusing mode for macro photography.

OPPO has also equipped the phone with its Hasselblad Ultra-Clear Native Camera system, alongside the second-generation Danxia colour reproduction lens and LUMO image processing engine. For video, the Pro Max supports 8K Log recording across its focal lengths as well as 4K 120fps Dolby Vision recording, with horizon stabilisation also supported.

Powering the device is an 8000mAh silicon-carbon battery, which supports 80W wired and 50W wireless charging. Other features include an ultrasonic in-display fingerprint sensor, Wi-Fi 7, IP66/IP68/IP69 dust and water resistance, and ColorOS 17 based on Android 17.

Meanwhile, the standard Find X10 retains much of the Pro Max’s photography-focused approach, although its camera setup is slightly more conventional. It features a 200MP f/1.6 main camera, a 50MP 120-degree ultrawide camera and a 200MP 2.8x periscope telephoto camera, along with a 50MP front-facing camera.

The phone comes with a 6.59-inch 1.5K LTPO display supporting a 144Hz maximum refresh rate, while its Dimensity 9600M chipset is paired with up to 16GB of RAM and 1TB of storage. Like the Pro Max, it also packs an 8000mAh battery with 80W wired and 50W wireless charging, as well as IP66/IP68/IP69 protection.

The more affordable Find X10 E takes a step down in hardware while retaining a triple-camera setup. It has a 6.59-inch 1.5K display with a 120Hz refresh rate and is powered by MediaTek’s Dimensity 9500s chipset, with up to 16GB of RAM and 512GB of storage.

Its rear cameras comprise three 50MP sensors, covering the main, ultrawide and 3x periscope telephoto roles. The phone also has a 32MP front camera, a 7025mAh battery with 80W wired and 50W wireless charging, and IP66/IP68/IP69 protection.

In China, the OPPO Find X10 E starts at CNY4,999 (~RM3,049) for the 12GB + 256GB model, while the standard model starts at CNY5,499 (~RM3,354) for 12GB + 256GB. The top-end Pro Max variant, on the other hand, starts at CNY6,799 (~RM4,147) for 12GB + 256GB.

For Malaysia, there is currently no word on whether the new Find X10 series will be launched locally. OPPO has previously confirmed that the Find X10 Pro Max will make its way to international markets, although a specific global launch date has yet to be announced.

(Source: OPPO China [1] [2] [3])